Wheel Hub 512374
The DUHUI Bearing 512374 wheel hub is a direct OE-replacement assembly designed for Toyota RAV4 and Lexus NX models. This rear wheel hub bearing matches OE references including 512374, 424100R010, VKBA7466, and HA590201, and is engineered for rear axle applications on these AWD and FWD platforms. It serves as a reliable OEM replacement wheel hub for a wide range of model years.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1260 |
| Part Number | 512374 |
| Position | Rear Axle |
| Design Type | Gen 3 (Roll-Form Design) |
| Inside Diameter | 62.00 mm (2.441 inch) |
| Outside Diameter | 152.00 mm (5.984 inch) |
| Flange Diameter | 151.50 mm (5.965 inch) |
| Flange Offset | 60.00 mm (2.362 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 61.90 mm (2.437 inch) |
| Hub Pilot Diameter | 75.80 mm (2.984 inch) |
| Wheel Pilot Diameter | 60.00 mm (2.362 inch) |
| Number of Bolt Holes | 5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 26 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1260
OE Numbers: 512374, 424100R010, VKBA7466, 4241042040, HA590201, 42410-0R010, 42410-42040
Reference Numbers (Interchange):
SKF: BR930765
Timken: HA590201
NTN: NT512374
MOOG: 512374
Mevotech: H512374
BCA: WE61617
GMB: 770-0047
Dorman: 951-219
Vehicle Fitment
Toyota: RAV4 (2006-2018)
Lexus: NX200t (2015-2017), NX300 (2018-2021), NX300h (2015-2021)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides stable load distribution for rear axle applications on Toyota RAV4 and Lexus NX models.
- Non-integrated ABS design uses a magnetic encoder ring in the seal, working with the existing wheel speed sensor on the vehicle.
- 152.00 mm outside diameter and 62.00 mm inside diameter ensure proper fit on the RAV4 and NX rear spindle.
- 26-spline count ensures proper engagement with the axle shaft on AWD models.
- 5 wheel studs with 114.30 mm bolt circle diameter ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 and Lexus NX models – verify position before ordering.
- Confirm the 26-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Toyota factory specifications for the RAV4 and NX.
- Keep the hub away from strong magnetic sources before installation to protect the encoder ring.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
