Wheel Hub 513302
The DUHUI Bearing 513302 wheel hub is a direct OE-replacement assembly designed for Subaru Impreza, Legacy, Outback, and WRX models. This front wheel hub bearing matches OE references including 513302, BR930769, 28373FE001, and WE60479, and is engineered for front axle applications on these AWD platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1768 |
| Part Number | 513302 |
| Position | Front Axle (Left, Right) |
| Bearing Generation | Gen 3 |
| Bearing Style | Ball Bearing |
| Inside Diameter | 29.00 mm (1.142 inch) |
| Outside Diameter | 138.00 mm (5.433 inch) |
| Flange Diameter | 138.00 mm (5.433 inch) |
| Flange Offset | 46.30 mm (1.823 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 58.00 mm (2.283 inch) |
| Hub Pilot Diameter | 83.90 mm (3.303 inch) |
| Wheel Pilot Diameter | 56.00 mm (2.205 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 27 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1768
OE Numbers: 513302, BR930769, 28373FE001, WE60479, 28373FE000, 28373FG010, 28373AL00A, 28373XA00A
Reference Numbers (Interchange):
SKF: BR930769
Timken: HA590150
NTN: WE60479
MOOG: 513302
Mevotech: H513302
BCA: 513302
GMB: 725-3360
Vehicle Fitment
Subaru: Impreza (2000-2014), Impreza WRX STI (2004-2014), Legacy (2015-2020), Outback (2015-2020), WRX (2015-2019), WRX STI (2013-2019), Forester (2019-2022), Ascent (2019-2022)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified front axle installation.
- Integrated ABS sensor with magnetic encoder in seal provides wheel speed signal directly from the hub assembly.
- 27-spline count ensures proper engagement with the axle shaft on AWD models.
- 138.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Subaru models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
Installation Notes
- This hub is for front axle applications on Subaru Impreza, Legacy, Outback, and WRX models – verify position before ordering.
- Confirm the 27-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to Subaru factory specifications for the specific model – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
