Wheel Hub 512253
The DUHUI Bearing 512253 wheel hub is a direct OE-replacement assembly designed for Volvo S60, V70, S80, and XC70 models from 1999 through 2010. This rear wheel hub bearing matches OE references including 512253, VKBA3632, and RW8253, and is engineered for rear axle applications on these sedan, wagon, and crossover platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1159 |
| Part Number | 512253 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 147.30 mm (5.799 inch) |
| Flange Offset | 58.40 mm (2.299 inch) |
| Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Brake Pilot Diameter | 76.00 mm (2.992 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1159
OE Numbers: 512253, RW8253, VKBA3632, 30639877, 30748192, 31201010, 31340689, 31340690, 31658084, 8624647
Reference Numbers (Interchange):
SKF: VKBA3632
Timken: HA590145
NTN: WE60816
MOOG: 512253
Mevotech: H512253
BCA: 512253
SNR: R170.25
FAG: 713618620
Vehicle Fitment
Volvo: S60 (2000-2010), V70 II (1999-2008), S80 (2004-2006) AWD, V70 (2001-2007) AWD, XC70 (2003-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system, with a separate wheel speed sensor mounted on the axle.
- 147.30 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Volvo S60, V70, S80, and XC70 models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Volvo S60, V70, S80, and XC70 models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 147.30 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Volvo factory specifications for the specific model – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
