Wheel Hub 512208
The DUHUI Bearing 512208 wheel hub is a direct OE-replacement assembly designed for Toyota Camry models from 2002 through 2007. This rear wheel hub bearing matches OE references including 512208, BR930232, RW8208, and HA596030, and is engineered for rear axle applications on this midsize sedan platform. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1117 |
| Part Number | 512208 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 151.90 mm (5.980 inch) |
| Flange Offset | 74.40 mm (2.929 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 62.00 mm (2.441 inch) |
| Hub Pilot Diameter | 74.00 mm (2.913 inch) |
| Wheel Pilot Diameter | 60.00 mm (2.362 inch) |
| Hub Bolt Circle Diameter | 99.00 mm (3.898 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Flange Shape | Offset Trapezoid |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1117
OE Numbers: 512208, RW8208, BR930232, 4241006030, HA596030, 42410-06030, 42450-06030
Reference Numbers (Interchange):
SKF: BR930232
Timken: HA596030
NTN: WE60443
MOOG: 512208
Mevotech: H512208
BCA: 512208
GMB: 730-0108
Vehicle Fitment
Toyota: Camry (2002-2007) Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 151.90 mm flange diameter with 4-bolt offset trapezoid flange pattern matches the original mounting configuration on Toyota Camry models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Camry models without ABS – verify your brake configuration before ordering.
- Confirm the 5-stud offset trapezoid flange pattern and 151.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the Camry – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
