Wheel Hub 512292
The DUHUI Bearing 512292 wheel hub is a direct OE-replacement assembly designed for Nissan Maxima models from 2004 through 2008. This rear wheel hub bearing matches OE references including 512292, BR930442, and RW8292, and is engineered for rear axle applications on this midsize sedan platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1192 |
| Part Number | 512292 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 147.30 mm (5.799 inch) |
| Flange Offset | 68.60 mm (2.701 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.60 mm (2.701 inch) |
| Hub Pilot Diameter | 83.80 mm (3.299 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Bolt Circle Diameter | 106.70 mm (4.201 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1192
OE Numbers: 512292, RW8292, BR930442, 43202-8J000, 43202-8J001, 43202-8J010
Reference Numbers (Interchange):
SKF: BR930442
Timken: HA590137
NTN: WE60449
MOOG: 512292
Mevotech: H512292
BCA: 512292
GMB: 730-0109
Vehicle Fitment
Nissan: Maxima (2004-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 147.30 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Nissan Maxima models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Maxima models – verify position before ordering.
- Confirm the 5-stud flange pattern and 147.30 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Nissan factory specifications for the Maxima – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
