Wheel Hub 512202
The DUHUI Bearing 512202 wheel hub is a direct OE-replacement assembly designed for Nissan Altima models from 2002 through 2006. This rear wheel hub bearing matches OE references including 512202, RW8202, 432028J000, and 432023Z000, and is engineered for rear axle applications on this midsize sedan platform. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1112 |
| Part Number | 512202 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Bolt Circle Diameter | 104.10 mm (4.098 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Flange Bolt Hole Size | M12 x 1.25 |
| Flange Shape | Rectangular |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1112
OE Numbers: 512202, RW8202, 432028J000, 432023Z000, PM512202, 43202-8J000, 43202-3Z000
Reference Numbers (Interchange):
SKF: BR930424
Timken: HA590091
NTN: WE60437
MOOG: 512202
Mevotech: H512202
BCA: 512202
GMB: 730-0104
Vehicle Fitment
Nissan: Altima (2002-2006) Non-ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 148.00 mm flange diameter with 4-bolt rectangular flange pattern matches the original mounting configuration on Nissan Altima models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Altima models without ABS – verify your brake configuration before ordering.
- Confirm the 5-stud rectangular flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Nissan factory specifications for the Altima – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
