Wheel Hub 512289
The DUHUI Bearing 512289 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Endeavor FWD models from 2004 through 2008. This rear wheel hub bearing matches OE references including 512289, RW8289, and MR589518, and is engineered for rear axle applications on this midsize SUV platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor for vehicles equipped with four-wheel ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1190 |
| Part Number | 512289 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 137.20 mm (5.402 inch) |
| Flange Offset | 35.60 mm (1.402 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.60 mm (2.701 inch) |
| Hub Pilot Diameter | 89.00 mm (3.504 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Hub Bolt Circle Diameter | 111.80 mm (4.402 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1190
OE Numbers: 512289, RW8289, MR589518, MR589519, 3785A005, 3785A006
Reference Numbers (Interchange):
SKF: BR930415
Timken: HA590132
NTN: WE60447
MOOG: 512289
Mevotech: H512289
BCA: 512289
GMB: 730-0108
Vehicle Fitment
Mitsubishi: Endeavor (2004-2008) FWD with 4-Wheel ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor with tone ring provides wheel speed signal directly from the hub assembly for four-wheel ABS systems.
- 137.20 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Mitsubishi Endeavor FWD models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Endeavor FWD models with four-wheel ABS – verify position and drive type before ordering.
- Confirm the 5-stud flange pattern and 137.20 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Mitsubishi factory specifications for the Endeavor – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
