Wheel Hub 512042
The DUHUI Bearing 512042 wheel hub is a direct OE-replacement assembly designed for Honda Civic models from 1996 through 2000. This rear wheel hub bearing matches OE references including 512042, 42200-S04-951, BR930480, and VKBA3798, and is engineered for rear axle applications on these coupe, hatchback, and sedan platforms. It serves as a reliable OEM replacement wheel hub for vehicles equipped with ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1039 |
| Part Number | 512042 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Inside Diameter | 28.00 mm (1.102 inch) |
| Outside Diameter | 134.00 mm (5.276 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated (Tone Ring) |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1039
OE Numbers: 512042, 42200-S04-951, 42200-SK7-A01
Reference Numbers (Interchange):
SKF: VKBA3798
Timken: HA590096
NTN: HUB008-75
BCA: 512042
SNR: R174.41
FAG: 713617430
MOOG: 512042
Mevotech: H512042
Vehicle Fitment
Honda: Civic Coupe (EJ6, EJ8) (1996-2000), Civic Hatchback (EJ9, EK1/3/4) (1995-2001), Civic Sedan (EJ9, EK3/4) (1995-2001)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Designed for vehicles equipped with ABS, featuring a tone ring for wheel speed signal.
- 134.00 mm outside diameter and 28.00 mm inside diameter ensure proper fit on the Honda Civic rear spindle.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, BCA, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic models with ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 134.00 mm outside diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Civic – do not use an impact wrench.
- Inspect the ABS tone ring and wheel speed sensor before installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
