Wheel Hub 512041
The DUHUI Bearing 512041 wheel hub is a direct OE-replacement assembly designed for Toyota Sienna models from 1998 through 2003. This rear wheel hub bearing matches OE references including 512041, BR930495, and RW841, and is engineered for rear axle applications on this minivan platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1038 |
| Part Number | 512041 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 152.90 mm (6.020 inch) |
| Flange Offset | 78.70 mm (3.098 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Pilot Diameter | 83.80 mm (3.299 inch) |
| Wheel Pilot Diameter | 61.00 mm (2.402 inch) |
| Flange Bolt Hole Quantity | 4 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1038
OE Numbers: 512041, BR930495, RW841, 42460-08010, 42460-08011, 42450-08010
Reference Numbers (Interchange):
SKF: BR930495
Timken: HA590159
NTN: WE60436
MOOG: 512041
Mevotech: H512041
BCA: 512041
GMB: 730-0140
Vehicle Fitment
Toyota: Sienna (1998-2003)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 152.90 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Toyota Sienna models.
- 5 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota Sienna models – verify position before ordering.
- Confirm the 5-stud flange pattern and 152.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the Sienna – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
