Wheel Hub 512040
The DUHUI Bearing 512040 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Expo, Expo LRV, Space Wagon, and Plymouth Colt models from 1991 through 2004. This rear wheel hub bearing matches OE references including 512040, MB584790, BR930258, and VKBA3327, and is engineered for rear axle applications on these compact MPV and wagon platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1037 |
| Part Number | 512040 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 56.40 mm (2.220 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 67.00 mm (2.638 inch) |
| Hub Pilot Diameter | 66.50 mm (2.618 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated with Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1037
OE Numbers: 512040, RW840, VKBA3327, MB584790, MB663557, BR930258
Reference Numbers (Interchange):
SKF: BR930258
Timken: 512040
NTN: HUB280-1
BCA: 512040
MOOG: 512040
SNR: R173.18
KOYO: DACF1086R-2
Mevotech: H512040
Vehicle Fitment
Mitsubishi: Expo (1992-1995) FWD, Expo LRV (1993-1994), Space Wagon (N3_W, N4_W) (1991-2000), Space Wagon (N5_W) (1998-2004), Space Star (2003-2004)
Eagle: Summit (1992-1996)
Plymouth: Colt (1992-1994)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated tone ring ABS sensor provides wheel speed signal directly from the hub assembly.
- 140.00 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Mitsubishi Expo, Space Wagon, and Plymouth Colt models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, BCA, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Expo, Space Wagon, and Plymouth Colt models – verify position before ordering.
- Confirm the 4-stud flange pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
