Wheel Hub 512038
The DUHUI Bearing 512038 wheel hub is a direct OE-replacement assembly designed for Toyota RAV4 and Ipsum models from 1994 through 2001. This rear wheel hub bearing matches OE references including 512038, 4240942010, VKBA3728, and RW838, and is engineered for rear axle applications on these SUV and MPV platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1035 |
| Part Number | 512038 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Bolt Circle Diameter | 105.92 mm (4.170 inch) |
| Flange Offset | 54.86 mm (2.160 inch) |
| Hub Pilot Diameter | 76.20 mm (3.000 inch) |
| Hub Bolt Circle Diameter | 106.68 mm (4.200 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1035
OE Numbers: 512038, 4240942010, 42409-42010, RW838, VKBA3728
Reference Numbers (Interchange):
SKF: VKBA3728
Timken: 512038
NTN: WE61167
BCA: 512038
MOOG: 512038
Mevotech: H512038
Centric: 405.44009E
GMB: 770-0341
Vehicle Fitment
Toyota: RAV4 First Generation (SXA1_) (1994-2000), RAV4 (1996-2000) 4WD, Ipsum MPV (XM10) (1996-2001)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 105.92 mm bolt circle diameter with 4-stud flange pattern matches the original mounting configuration on Toyota RAV4 and Ipsum models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, BCA, and GMB part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 and Ipsum models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 105.92 mm bolt circle diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Toyota factory specifications for the RAV4 and Ipsum – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
