Wheel Hub 512036
The DUHUI Bearing 512036 wheel hub is a direct OE-replacement assembly designed for Subaru Impreza and Legacy models from 1989 through 2009. This rear wheel hub bearing matches OE references including 512036, BR930212, and RW836, and is engineered for rear axle applications on these sedan and station wagon platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1033 |
| Part Number | 512036 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 140.60 mm (5.535 inch) |
| Flange Offset | 54.50 mm (2.146 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Brake Pilot Diameter | 61.00 mm (2.402 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Pilot Diameter | 51.50 mm (2.028 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1033
OE Numbers: 512036, RW836, BR930212, 28016-AA00A, 28016-AA01A, 28016-AA02A, 28016-AA10A
Reference Numbers (Interchange):
SKF: BR930212
Timken: 512036
NTN: HUB082-16
BCA: 512036
MOOG: 512036
SNR: R173.16
KOYO: DACF1080R-2
Mevotech: H512036
Vehicle Fitment
Subaru: Impreza Station Wagon (GF) (1992-2000), Impreza Station Wagon (GD, GG) (2000-2008), Impreza Sedan (GC) (1992-2001), Impreza Sedan (GD, GG) (1999-2009), Impreza Saloon (GR) (2007-), Legacy Sedan (BC) (1989-1995), Legacy Station Wagon (BJF) (1989-1994), Legacy Sedan (BD, BG) (1994-1999), Legacy Station Wagon (BD, BG) (1994-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 140.60 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Subaru Impreza and Legacy models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, BCA, and SNR part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Subaru Impreza and Legacy models without ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 140.60 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Subaru factory specifications for the Impreza and Legacy – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
