Wheel Hub 512178
The DUHUI Bearing 512178 wheel hub is a direct OE-replacement assembly designed for Honda Accord models from 1997 through 2003. This rear wheel hub bearing matches OE references including 512178, VKBA3952, 42200-S84-A51, and BR930276, and is engineered for rear axle applications on these coupe and sedan platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1088 |
| Part Number | 512178 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 151.90 mm (5.980 inch) |
| Flange Offset | 55.90 mm (2.201 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated with Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1088
OE Numbers: 512178, RW8178, VKBA3952, 42200-S84-A51, 42200-S84-A01, 42200-S87-A01, 42200-SEP-A01
Reference Numbers (Interchange):
SKF: BR930276
Timken: HA590090
NTN: WE60434
MOOG: 512178
Mevotech: H512178
BCA: 512178
GMB: 730-0103
Vehicle Fitment
Honda: Accord Coupe (CG) (1997-2003), Accord (1998-2002) L4 2.3L with Rear Disc Brakes
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated tone ring ABS sensor provides wheel speed signal directly from the hub assembly.
- 151.90 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Honda Accord models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord models with rear disc brakes – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 151.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Accord – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
