Wheel Hub 512176
The DUHUI Bearing 512176 wheel hub is a direct OE-replacement assembly designed for Honda Accord models from 1998 through 2002. This rear wheel hub bearing matches OE references including 512176, VKBA3953, 42200S84A01, and BR930167, and is engineered for rear axle applications on these sedan and coupe platforms. It serves as a reliable OEM replacement wheel hub for non-ABS equipped vehicles with rear drum brakes.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1086 |
| Part Number | 512176 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Style | Ball Bearing |
| Flange Diameter | 151.90 mm (5.980 inch) |
| Flange Offset | 55.88 mm (2.200 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 64.00 mm (2.520 inch) |
| Hub Pilot Diameter | 66.04 mm (2.600 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1086
OE Numbers: 512176, 42200S84A01, 42200S84C01, 42200S84C010M1
Reference Numbers (Interchange):
SKF: BR930167
Timken: 512176
NTN: WE60524
MOOG: 512176
Mevotech: H512176
BCA: WE60524
GMB: 735-0110
Vehicle Fitment
Honda: Accord (1998-2002) L4 2.3L Non-ABS with Rear Drum Brakes
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 2 hub assembly combines the bearing and flange into one unit for simplified rear axle installation.
- Non-integrated ABS design for vehicles without anti-lock braking system.
- 151.90 mm flange diameter with 4-stud flange pattern matches the original mounting configuration on Honda Accord models.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and BCA part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Accord models without ABS and with rear drum brakes – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 151.90 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Accord – do not use an impact wrench.
- Inspect the wheel speed sensor wiring before installation if your vehicle is equipped with ABS.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
