Wheel Hub VKBA734
The DUHUI Bearing VKBA734 wheel hub is a direct OE-replacement assembly designed for Fiat Panda (141A_) models from 1980 through 2004. This front wheel hub bearing matches OE references including 4400918, 5890994, and 3981586. It features a Gen 1 hub unit design with 4 wheel studs, a 117.00 mm flange diameter, and a non-ABS configuration, engineered for front axle applications on this compact hatchback platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0384 |
| Part Number | VKBA734 |
| Position | Front Axle (Left, Right) |
| Bearing Type | Ball Bearing |
| Inner Diameter | 20.00 mm (0.787 inch) |
| Outer Diameter | 117.00 mm (4.606 inch) |
| Width | 69.00 mm (2.717 inch) |
| Flange Diameter | 117.00 mm (4.606 inch) |
| Rim Hole Number | 4 |
| Weight | 2.12 kg (4.67 lbs) |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0384
OE Numbers: 4400918, 5890994, 3981586, 71747857, 5963034, 2144400918, 028140301A
Reference Numbers (Interchange):
SKF: VKBA734
SKF: BA2B633292C
FAG: 713690010
SNR: R158.13
Optimal: 801342
NK: 26514
BRT: BRT660
MAPCO: 26514
Meyle: 214 440 0918
VAICO: V24-0700
Kavo Parts: WBH-6503
Febest: 2382-PANDA
Nipparts: J4700503
Vehicle Fitment
FIAT: Panda (141A_) (1980-2004) 0.9, 1.0, 1.1, 1.3 D, Panda Van (141_) (1986-2004), Panda 4×4 (141_) (1983-2004)
LANCIA: Y10 (156_) (1985-1995)
AUTOBIANCHI: Y10 (1985-1995)
SEAT: Panda (141A) (1980-1986)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 1 hub assembly combines the bearing and flange into one pre-assembled unit for simplified front axle installation on Fiat Panda 141A and Lancia Y10 platforms.
- Non-ABS design for vehicles without anti-lock braking systems.
- 117.00 mm flange diameter with 4-hole rim pattern matches the original mounting configuration on Panda and Y10 front axles.
- 20.00 mm inner diameter and 69.00 mm width provide the correct bearing envelope for these compact platforms.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA734, FAG 713690010, SNR R158.13, and Optimal 801342 ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Fiat Panda (141A_) (1980-2004), Panda Van (1986-2004), Panda 4×4 (1983-2004), Lancia Y10 (1985-1995), Autobianchi Y10 (1985-1995), and Seat Panda (1980-1986) models without front ABS.
- Confirm the 4-hole rim pattern and 117.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Fiat Panda platform.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
