Wheel Hub VKBA6889
The DUHUI Bearing VKBA6889 wheel hub is a direct OE-replacement assembly designed for Subaru Legacy Sedan and Station Wagon models from 2003 through 2015 and Subaru Outback (BE, BH, BP) models from 1998 through 2010. This rear wheel hub bearing matches OE references including 28473-AG000, 28473-AG001, 28473-AG00A, and 28473-AG00B. It features a Gen 3 hub unit design with 5 wheel studs, a 124.50 mm flange diameter, and an integrated ABS sensor, engineered for rear axle applications on these sedan, wagon, and crossover platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0346 |
| Part Number | VKBA6889 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 124.50 mm (4.902 inch) |
| Flange Offset | 66.00 mm (2.598 inch) |
| Bolt Circle Diameter | 99.10 mm (3.902 inch) |
| Wheel Pilot Diameter | 55.90 mm (2.201 inch) |
| Brake Pilot Diameter | 58.40 mm (2.299 inch) |
| Hub Pilot Diameter | 83.80 mm (3.299 inch) |
| Hub Bolt Circle Diameter | 106.70 mm (4.201 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Spline Count | 25 |
| ABS Sensor | Integrated |
| Product Material | GCR15 / 55# / 65MN |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0346
OE Numbers: 28473-AG000, 28473-AG001, 28473-AG00A, 28473-AG00B, 28473-AG01A, 28473-AG02A
Reference Numbers (Interchange):
SKF: VKBA6889
SKF: BR930548
FAG: 713622200
SNR: R181.24
NTN: HUB194-11
NSK: 55BWKH14
Timken: HA590151
BCA: 512337
MOOG: 512337
GMB: 770-0335
Mevotech: H512337
Optimal: 962729
Kavo Parts: WBH6523
Febest: 0282-BP5R
Japanparts: KK-22046
Nipparts: N4717017
Vehicle Fitment
SUBARU: Legacy IV Sedan (BL, BP) (2003-2009) 2.0, 2.5, 3.0 R, Legacy IV Station Wagon (BL, BP) (2003-2009), Legacy V Sedan (BM, BR) (2009-2015) 2.0, 2.5, 3.6 R, Outback II (BE, BH) (1998-2003) 2.5, 3.0, Outback III (BP) (2003-2010) 2.5, 3.0, 3.6, B9 Tribeca (2006-2007), Tribeca (2008-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS sensor into one pre-assembled unit for simplified rear axle installation on Subaru Legacy and Outback platforms.
- Integrated ABS sensor ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 124.50 mm flange diameter with 5-stud wheel pattern and 99.10 mm bolt circle matches the original mounting configuration on Legacy and Outback rear axles.
- 25-spline hub design matches the original driveshaft engagement for AWD applications.
- Manufactured from GCR15 bearing steel with 55# and 65MN components for durability and wear resistance.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA6889, SKF BR930548, FAG 713622200, and SNR R181.24 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Subaru Legacy IV (2003-2009), Legacy V (2009-2015), Outback II (1998-2003), Outback III (2003-2010), and Tribeca (2006-2014) models with rear ABS.
- Confirm the 5-stud wheel pattern and 124.50 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and 4 flange bolts to Subaru service manual specifications for the respective platform.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
