Wheel Hub VKBA6834
The DUHUI Bearing VKBA6834 wheel hub is a direct OE-replacement assembly designed for Honda Civic VII Hatchback (EU, EP) and Sedan (ES, ET) models from 1999 through 2006, and Acura EL models from 2001 through 2005. This rear wheel hub bearing matches OE references including 42200-S5A-008, 42200-S5A-J01, and 42200-S5A-A51. It features a Gen 3 hub unit design with 4 wheel studs, a 139.00 mm flange diameter, and an integrated ABS tone ring sensor, engineered for rear axle applications on these compact sedan and hatchback platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0322 |
| Part Number | VKBA6834 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Angular Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 55.88 mm (2.200 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Wheel Pilot Diameter | 55.88 mm (2.200 inch) |
| Brake Pilot Diameter | 60.96 mm (2.400 inch) |
| Hub Pilot Diameter | 66.04 mm (2.600 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| ABS Sensor | Integrated Tone Ring |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0322
OE Numbers: 42200-S5A-008, 42200-S5A-J01, 42200-S5A-A51, 42200-S5A-A01
Reference Numbers (Interchange):
SKF: VKBA 6834
FAG: 713627060
SNR: R174.52
NTN: WE60561
KOYO: 3DACF026F-2
TIMKEN: HA590136
BCA: 512258
MOOG: 512258
GMB: 735-0308
Mevotech: H512258
Optimal: 982575
GSP: 363258
Kavo Parts: WBK-4515
Blueprint: ADH28532
Nipparts: J4714039
Quinton Hazell: QWB1247
Vehicle Fitment
HONDA: Civic VII Hatchback (EU, EP) (1999-2006) 1.4, 1.6, 2.0 Type-R, Civic VII Sedan (ES, ET) (2000-2006) 1.4, 1.5, 1.6, 1.7
ACURA: EL (2001-2005) 1.7
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS tone ring into one pre-assembled unit for simplified rear axle installation on Honda Civic VII and Acura EL platforms.
- Integrated ABS tone ring monitors wheel speed for anti-lock braking systems.
- 139.00 mm flange diameter with 4-stud wheel pattern and 100.00 mm bolt circle matches the original mounting configuration on Civic VII and Acura EL rear axles.
- 55.88 mm wheel pilot diameter and 60.96 mm brake pilot diameter ensure proper wheel and brake component alignment.
- 4 wheel studs with M12 x 1.5 thread and 55.88 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6834, FAG 713627060, SNR R174.52, and NTN WE60561 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Honda Civic VII Hatchback and Sedan (1999-2006) and Acura EL (2001-2005) models with rear ABS.
- Confirm the 4-stud wheel pattern and 139.00 mm flange diameter match your vehicle mounting configuration.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the Honda Civic VII or Acura EL platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
