Wheel Hub VKBA6824
The DUHUI Bearing VKBA6824 wheel hub is a direct OE-replacement assembly designed for Toyota RAV4 second-generation SUV (XA2) models from 2000 through 2005. This rear wheel hub bearing matches OE references including 42410-42020, 42410-42021, and 42410-42030. It features a Gen 2 hub unit design with 5 wheel studs, a 152.00 mm flange diameter, and a non-integrated ABS design, engineered for rear axle applications on this compact SUV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0320 |
| Part Number | VKBA6824 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 2 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.15 mm (4.494 inch) |
| Wheel Pilot Diameter | 59.94 mm (2.360 inch) |
| Brake Pilot Diameter | 81.31 mm (3.201 inch) |
| Hub Pilot Diameter | 83.87 mm (3.302 inch) |
| Hub Bolt Circle Diameter | 108.36 mm (4.266 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Size | 10.59 mm (0.417 inch) |
| Flange Bolt Hole Quantity | 4 |
| Spline Count | 26 |
| ABS Sensor | No |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0320
OE Numbers: 42410-42020, 42410-42021, 42410-42030
Reference Numbers (Interchange):
SKF: VKBA 6824
FAG: 713618840
SNR: R169.78
NTN: HUB070-16
NSK: 45BWK05
KOYO: DACF1091
TIMKEN: 512200
BCA: 512200
MOOG: 512200
GMB: 770-0265
Mevotech: H512200
Optimal: 982740
Kavo Parts: WBH-9018
Febest: 0182-ACA2R
Japanparts: KK-22045
Blueprint: ADT38388
Vehicle Fitment
TOYOTA: RAV4 II (XA2) (2000-2005) 1.8 VVT-i, 2.0 VVT-i, 2.0 D-4D, 2.0 4WD, including 3-door and 5-door variants
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 2 hub assembly combines the bearing and flange into one pre-assembled unit for simplified rear axle installation on the Toyota RAV4 XA2 platform.
- Non-ABS design for vehicles without rear anti-lock braking systems at the hub.
- 152.00 mm flange diameter with 5-stud wheel pattern and 114.15 mm bolt circle matches the original mounting configuration on RAV4 XA2 rear axles.
- 26-spline hub design matches the original driveshaft engagement for 4WD applications.
- 4 flange bolt holes with 10.59 mm size and 69.00 mm flange offset match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6824, FAG 713618840, SNR R169.78, and Blue Print ADT38388 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 II (XA2) (2000-2005) models without rear ABS at the hub.
- Confirm the 5-stud wheel pattern and 152.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and 4 flange bolts to Toyota service manual specifications for the RAV4 XA2 platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the hub bore and spindle for wear or corrosion before installing the new assembly.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
