Wheel Hub VKBA6822
The DUHUI Bearing VKBA6822 wheel hub is a direct OE-replacement assembly designed for Toyota RAV4 second-generation (XA2) models from 2000 through 2005, including 1.8 and 2.4 4WD variants. This rear wheel hub bearing matches OE references including 42410-42030 and 42410-42050. It features a Gen 3 hub unit design with 5 wheel studs, a 152.00 mm flange diameter, and an integrated ABS tone ring, engineered for rear axle applications on this compact SUV platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0318 |
| Part Number | VKBA6822 |
| Position | Rear Axle (Left, Right) |
| Bearing Generation | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Outer Diameter | 152.00 mm (5.984 inch) |
| Height | 95.50 mm (3.760 inch) |
| Outer Diameter 2 | 83.80 mm (3.299 inch) |
| Flange Diameter | 152.00 mm (5.984 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Rim Hole Number | 5 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated Tone Ring |
| Weight | 3.23 kg (7.12 lbs) |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0318
OE Numbers: 42410-42030, 42410-42050, 42410-42051
Reference Numbers (Interchange):
SKF: VKBA 6822
FAG: 713618840
SNR: R169.77
NTN: HUB070-16
NSK: 45BWK05
KOYO: DACF1091
TIMKEN: 512201
BCA: 512201
MOOG: 512201
GMB: 770-0266
Mevotech: H512201
Optimal: 982742
Kavo Parts: WBH-9019
Febest: 0182-ACA2R
Japanparts: KK-22046
Nipparts: J4712061
Vehicle Fitment
TOYOTA: RAV4 II (XA2) (2000-2005) 1.8 (ZCA25_, ZCA26_), 2.0 VVT-i, 2.0 D-4D, 2.4 4WD (ACA23, ACA22), including 3-door and 5-door variants
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Gen 3 hub assembly combines the bearing, flange, and ABS tone ring into one pre-assembled unit for simplified rear axle installation on the Toyota RAV4 XA2 platform.
- Integrated ABS tone ring monitors wheel speed for anti-lock braking systems.
- 152.00 mm flange diameter with 5-stud wheel pattern and 114.30 mm bolt circle matches the original mounting configuration on RAV4 XA2 rear axles.
- 95.50 mm height and 83.80 mm outer diameter 2 provide the correct bearing envelope for this compact SUV platform.
- 5 wheel studs with M12 x 1.5 thread and 4-bolt flange mounting match the OEM attachment geometry.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF VKBA 6822, FAG 713618840, SNR R169.77, and NTN HUB070-16 ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Toyota RAV4 II (XA2) (2000-2005) models with rear ABS.
- Confirm the 5-stud wheel pattern and 152.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut and 4 flange bolts to Toyota service manual specifications for the RAV4 XA2 platform. Do not use an impact wrench to tighten the axle nut.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated tone ring sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
