Wheel Hub VKBA7607
The DUHUI Bearing VKBA7607 wheel hub is a front axle hub assembly engineered for Nissan Navara NP300 (D40) 4WD models from 2005 through 2019. This front wheel hub bearing matches OE references including 40202-JR70B, 40202-JR70C, and 40202-JR70A-SY. It features an integrated ABS sensor and a 5-stud flange, designed for direct replacement on the D40 pickup and chassis cab platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0429 |
| Part Number | VKBA7607 |
| Position | Front Axle (Left, Right) |
| Product Type | Wheel Hub Assembly |
| Outer Diameter | 139.80 mm (5.504 inch) |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Height | 120.00 mm (4.724 inch) |
| Bolt Hole Distance | 61.10 mm (2.406 inch) |
| Rim Hole Number | 5 |
| ABS Sensor | Integrated Sensor |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0429
OE Numbers: 40202-JR70B, 40202-JR70C, 40202-JR70A-SY
Reference Numbers (Interchange):
SKF: VKBA 7607
SNR: R168.78
NTN: HUB171T-1
MOOG: 512386
OPTIMAL: 961728
GSP: 9329005
NIPPARTS: N4701055
NPS: N470N58
ABS: 201343
Vehicle Fitment
NISSAN: Navara NP300 (D40) (2005-2019) 2.5 dCi 4WD, 3.0 dCi 4WD; Navara NP300 Platform/Chassis (D40) (2008-2019) 2.5 dCi 4WD, 3.0 dCi 4WD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub unit with integrated ABS sensor for Nissan Navara D40 4WD models equipped with anti-lock braking systems.
- Matches Nissan OE numbers 40202-JR70B, 40202-JR70C, and 40202-JR70A-SY for direct replacement on the D40 platform front axle.
- 5-stud flange with 139.80 mm outer diameter and 61.10 mm bolt hole distance matches the original mounting configuration on Navara 4WD front axles.
- Pre-assembled hub unit with sealed bearing simplifies installation and eliminates bearing pressing.
- Cross-references to SKF VKBA 7607, GSP 9329005, OPTIMAL 961728, and NIPPARTS N4701055 simplify sourcing and verification.
Installation Notes
- This hub is for front axle applications on Nissan Navara NP300 (D40) 4WD models equipped with ABS.
- Confirm the 5-stud rim pattern and 139.80 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit.
- Torque the axle nut and wheel bolts to Nissan service manual specifications for the D40 chassis.
- Inspect the ABS sensor connector and wiring harness for damage before installation, as this hub includes an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
