Wheel Hub VKBA6753
The DUHUI Bearing VKBA6753 wheel hub is a rear axle hub assembly engineered for Land Rover Discovery II (L318) models from 1998 through 2004. This rear wheel hub bearing matches OE references including TAY100060, TAY100060E, and TAD100020. It features an integrated ABS sensor, a 4-hole flange pattern with 131.00 mm flange diameter, and a heavy-duty bearing design, suitable for direct replacement on the Discovery II rear axle.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0297 |
| Part Number | VKBA6753 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Hub Unit |
| Inner Diameter 1 | 45.00 mm (1.772 inch) |
| Inner Diameter 2 | 45.00 mm (1.772 inch) |
| Outer Diameter 1 | 131.00 mm (5.157 inch) |
| Outer Diameter 2 | 156.00 mm (6.142 inch) |
| Width 1 | 60.00 mm (2.362 inch) |
| Width 2 | 60.00 mm (2.362 inch) |
| Bolt Hole Circle Diameter | 120.00 mm (4.724 inch) |
| Rim Hole Number | 4 |
| Thread Size | M12 x 1.75 |
| ABS Sensor | Integrated Sensor |
| Weight | 4.20 kg (9.26 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0297
OE Numbers: TAY100060, TAY100060E, TAY100060Z, TAY100060OE, TAD100020
Reference Numbers (Interchange):
SKF: VKBA 6753
SNR: R184.29
FAG: 713 6753 30
MOOG: LR-WB-11760
BLUE PRINT: ADJ138220
FEBI BILSTEIN: 175524
OPTIMAL: 982699
METZGER: 214 752 0000
NK: 754013
BRTEC: 993328
TRISCAN: 8530 13258
Vehicle Fitment
LAND ROVER: Discovery II (L318) (1998-2004) 2.5 Td5 4×4, 4.0 4×4, 4.0 i V8 4×4, 4.6 4×4
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub unit with integrated ABS sensor for Land Rover Discovery II (L318) models equipped with anti-lock braking systems.
- Matches Land Rover OE numbers TAY100060, TAY100060E, TAY100060Z, and TAD100020 for direct replacement on the Discovery II rear axle.
- 4-hole flange pattern with 131.00 mm flange diameter and 120.00 mm bolt circle matches the original mounting configuration on Discovery II rear hubs.
- 45.00 mm inner diameter and 60.00 mm width provide the correct bearing envelope for this heavy-duty 4×4 application.
- Cross-references to SKF VKBA 6753, MOOG LR-WB-11760, BLUE PRINT ADJ138220, and NK 754013 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Land Rover Discovery II (L318) (1998-2004) models equipped with ABS.
- Confirm the 4-hole rim pattern and 131.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit. Any contamination can cause misalignment or runout.
- Torque the driveshaft hub nut to 490 Nm (360 lb-ft) as specified by Land Rover. Incorrect torque is the number one cause of premature bearing failure.
- After installation, clear any stored fault codes in the ABS system. If this is not done, the ABS light may not cancel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
