Wheel Hub VKBA6750
The DUHUI Bearing VKBA6750 wheel hub is a front axle hub assembly engineered for Land Rover Discovery 3 (L319), Discovery 4 (L319), and Range Rover Sport (L320) models from 2004 through 2018. This front wheel hub bearing matches OE references including LR014147, LR076692, and RFM500010, with cross-references to SKF VKBA 6750 and FAG 713620390. It features a 158.60 mm flange diameter, a 5-hole rim pattern, and an integrated ABS sensor, designed for direct replacement on these Land Rover and Range Rover platforms.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0296 |
| Part Number | VKBA6750 |
| Position | Front Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Flange Diameter | 158.60 mm (6.244 inch) |
| Rim Hole Number | 5 |
| ABS Sensor | Integrated Sensor Ring |
| Weight | 4.76 kg (10.49 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0296
OE Numbers: LR014147, LR076692, LR048083, RFM500010
Reference Numbers (Interchange):
SKF: VKBA 6750
SNR: R180.03
FAG: 713620390
TIMKEN: HA590356
MOOG: LR-WB-11760
BLUE PRINT: ADJ138215
OPTIMAL: 982699
METZGER: 214 752 0000
NK: 754013
A.B.S.: 201280
GSP: 9230034
MAXGEAR: 33-0872
Vehicle Fitment
LAND ROVER: Discovery III (L319) (2004-2009) 2.7 TD 4×4, 4.0 4×4, 4.0 V6 4×4, 4.4 4×4; Discovery IV (L319) (2009-2018) 2.7 TD 4×4, 3.0 4×4, 3.0 SDV6 4×4, 3.0 TD 4×4, 4.0 4×4, 5.0 V8 4×4
RANGE ROVER: Range Rover Sport (L320) (2005-2013) 2.7 TDV6 4×4, 3.0 TDV6 4×4, 3.6 TDV8 4×4, 4.2 V8 Supercharged 4×4, 4.4 V8 4×4, 5.0 V8 4×4
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel bearing kit with integrated ABS sensor ring for Land Rover Discovery 3/4 and Range Rover Sport (L320) models equipped with anti-lock braking systems.
- Matches Land Rover OE numbers LR014147, LR076692, LR048083, and RFM500010 for direct replacement.
- 158.60 mm flange diameter with 5-hole rim pattern matches the original mounting configuration on these front axles.
- Pre-assembled hub unit with sealed bearing simplifies installation and eliminates the need for separate bearing pressing.
- Cross-references to SKF VKBA 6750, FAG 713620390, and BLUE PRINT ADJ138215 simplify sourcing and verification.
Installation Notes
- This hub is for front axle applications on Land Rover Discovery 3 (L319) (2004-2009), Discovery 4 (L319) (2009-2018), and Range Rover Sport (L320) (2005-2013) models equipped with ABS.
- Confirm the 5-hole rim pattern and 158.60 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new hub unit.
- Torque the axle nut to 490 Nm (360 lb-ft) as specified by Land Rover. Incorrect torque is a common cause of premature bearing failure.
- After installation, clear any stored fault codes in the ABS system. If this is not done, the ABS light may not cancel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
