Wheel Hub VKBA6670
The VKBA6670 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the rear axle of select BMW 5-Series F10/F11, 5 Gran Turismo F07, 6-Series F06/F12/F13, and 7-Series F01/F02 vehicles manufactured between 2008 and 2017. This complete hub assembly is pre-assembled for simplified installation. This kit matches OE specifications including 33416775021 and 33406850159, and interchanges with industry-standard references such as SKF VKBA6670, FAG 713649500, and SNR R150.48.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH0286 |
| Part Number | VKBA6670 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Kit Contents | Hub × 1 |
| Inner Diameter | 49.00 mm (1.929 inch) |
| Outer Diameter | 128.00 mm (5.039 inch) |
| Outer Diameter 1 | 92.00 mm (3.622 inch) |
| Width | 45.00 mm (1.772 inch) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH0286
OE Numbers:
33416775021, 33411133785, 33406850159, 33406850156, 33406765432, 33326764902
Reference Numbers (Interchange):
SKF: VKBA6670
FAG: 713649500
SNR: R150.48
Vehicle Fitment
BMW 5-SERIES (F10, SEDAN): 2009–2016
BMW 5-SERIES (F11, TOURING): 2009–2017
BMW 5 GRAN TURISMO (F07): 2009–2017
BMW 6-SERIES (F06, GRAN COUPE): 2011–2019
BMW 6-SERIES (F12, CONVERTIBLE): 2011–2018
BMW 6-SERIES (F13, COUPE): 2010–2017
BMW 7-SERIES (F01/F02): 2008–2015
All applications: Rear Axle. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW F01/F02, F07, F10/F11, F06/F12/F13 platform applications. Matches OE specifications 33416775021 and 33406850159.
- Precision-engineered to BMW tolerances for proper fitment and performance.
- Pre-set, pre-lubricated, and sealed – maintenance-free design.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Before installation, compare the inner diameter (49.00 mm), outer diameter (128.00 mm), and width (45.00 mm) against your original hub.
- Confirm your vehicle model and year match the fitment list before ordering.
- Torque the hub mounting bolts and wheel nuts to BMW specification.
- This hub fits both rear driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
