Wheel Hub VKBA7430
The DUHUI Bearing VKBA7430 wheel hub is a rear axle hub assembly engineered for Toyota Corolla E12 models from 2000 through 2008 without ABS. This rear wheel hub bearing matches OE references including 42410-02100, 42410-02101, and 42410-02140, with cross-references to SKF VKBA 7430, SNR R184.47, and Optimal 982227. It features a 135.00 mm flange diameter, a 4-hole rim pattern, and a non-ABS bearing configuration, designed for direct replacement on Corolla E12 hatchback, sedan, estate, and Verso rear axles.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0397 |
| Part Number | VKBA7430 |
| Position | Rear Axle (Left, Right) |
| Product Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer Diameter 1 | 73.70 mm (2.902 inch) |
| Outer Diameter 2 | 135.00 mm (5.315 inch) |
| Inner Diameter | 54.00 mm (2.126 inch) |
| Width | 54.00 mm (2.126 inch) |
| Flange Diameter | 135.00 mm (5.315 inch) |
| Bolt Hole Circle Diameter | 100.00 mm (3.937 inch) |
| Rim Hole Number | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Weight | 2.47 kg (5.45 lbs) |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0397
OE Numbers: 42410-02100, 42410-02101, 42410-02140, 42410-12210, 42410-12211
Reference Numbers (Interchange):
SKF: VKBA 7430
FAG: 713 6179 80
SNR: R184.47
NTN: 3DACF026F-7A
KOYO: DACF1091
Optimal: 982227
Mapco: 26481
Kavo Parts: WBH-9046
Ruville: 221814
Spidan: 72146
Vehicle Fitment
TOYOTA: Corolla (_E12_) Hatchback (2001-2007) 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 1.8 VVTL-i TS (ZZE123), 2.0 D-4D (CDE120_); Corolla Saloon (_E12_) (2000-2008) 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 2.0 D-4D (CDE120_); Corolla Estate (_E12_) (2001-2007) 1.4 D4-D (NDE120_), 1.4 VVT-i (ZZE120_), 1.6 VVT-i (ZZE121_), 2.0 D-4D (CDE120_); Corolla Verso (_E12_) MPV (2001-2004) 1.6 VVT-i (ZZE121_), 1.8 VVT-i (ZZE122_), 2.0 D-4D (CDE120_)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel bearing kit designed specifically for Toyota Corolla E12 models without ABS, covering hatchback, sedan, estate, and Verso body styles from 2000 through 2008.
- Matches Toyota OE numbers 42410-02100, 42410-02101, 42410-02140, 42410-12210, and 42410-12211 for direct replacement on the E12 rear axle.
- 4-hole rim pattern with 135.00 mm flange diameter and 100.00 mm bolt circle matches the original mounting configuration on Corolla E12 rear hubs.
- 73.70 mm outer diameter and 54.00 mm width provide the correct bearing envelope for this non-ABS application.
- Cross-references to SKF VKBA 7430, SNR R184.47, NTN 3DACF026F-7A, and KOYO DACF1091 simplify sourcing and verification.
Installation Notes
- This hub is for rear axle applications on Toyota Corolla E12 (2000-2008) models without ABS. Confirm your vehicle is non-ABS before ordering.
- Confirm the 4-hole rim pattern and 135.00 mm flange diameter match your vehicle mounting knuckle before installation.
- Clean the axle spindle and mounting surface thoroughly before installing the new bearing unit.
- This bearing kit requires a press for installation. Use the correct adapter set to avoid damaging the bearing races during pressing.
- Check for proper wheel rotation and bearing pre-load after installation. Non-ABS hubs do not have a sensor connector.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
