Universal Joint MB000697 For MITSUBISHI
The DUHUI Bearing MB000697 universal joint is a direct-fit OE replacement designed for Mitsubishi Dion, eK, and Grandis rear axle applications. This driveshaft u-joint transfers torque from the transmission to the wheels while accommodating angular changes between driveline components. Manufactured to match original equipment specifications including MB000697, MB505372, and MN110469, this universal joint delivers reliable performance for compatible Mitsubishi applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | MB000697 |
| Product Type | Universal Joint |
| Application | Driveshaft / Propeller Shaft |
| Installation Location | Rear |
| Outside Diameter | 20.00 mm (0.787 inch) |
| Length | 55.00 mm (2.165 inch) |
| Weight | 0.180 kg (0.397 lbs) |
| Vehicle Application | Mitsubishi |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
MB000697, MB505372, MN110469
Vehicle Fitment
MITSUBISHI: DION MPV (CR_W) 1.8 GDI (CR5W) 2002-2005
MITSUBISHI: eK Hatchback (H81W) 0.7 2001-2006
MITSUBISHI: GRANDIS (NA_W) 2.4 MIVEC 4WD (NA4W) 2004-2011
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Mitsubishi Dion, eK, and Grandis rear axle driveline applications. Matches OEM specifications MB000697, MB505372, and MN110469.
- Precision-ground bearing surfaces ensure smooth rotation and minimize wear.
- 20.00 mm outside diameter provides exact fitment for the driveshaft yoke.
- Durable steel construction withstands high torque loads and angular misalignment.
- Cross-references to multiple OE numbers for broad interchange compatibility.
Installation Notes
- Verify the 20.00 mm outside diameter matches your driveshaft yoke before installation.
- Check that the 55.00 mm overall length is correct for your application.
- This component is designed for rear axle installation – confirm your vehicle configuration.
- Lubricate the bearing caps and needle bearings before fitting.
- Torque the retaining bolts or straps to Mitsubishi manufacturer specifications (refer to service manual).
- After installation, check for smooth rotation and ensure there is no play in the joint.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints to OE specifications. Contact us
