Tensioner 06K903133C For Audi Skoda
The DUHUI Bearing 06K903133C drive belt tensioner is an OE-spec replacement component for the accessory drive belt system on a wide range of Audi and Škoda models equipped with 2.0 TSI and 1.8 TSI engines. This automatic spring-loaded tensioner maintains proper serpentine belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 06K903133C and 06K903133B, this unit is a critical component for the VW Group EA888 Gen 3 engine family.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 06K903133C |
| Outer Diameter | 60.00 mm (2.362 inch) |
| Width | 24.00 mm (0.945 inch) |
| Product Type | Belt Tensioner / Automatic Drive Belt Tensioner |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 06K903133C, 06K903133B, 06K903133A
Reference Numbers (Interchange):
GATES: 39272
INA: 534 0105 10
CONTINENTAL: V-3569
DAYCO: 89649
FEBI BILSTEIN: 30686
Vehicle Fitment
This drive belt tensioner is designed for VW Group models equipped with 2.0 TSI and 1.8 TSI engines (EA888 Gen 3, engine codes CHHA, CHHB, CJEB, CJSA, CJSB, CJXC, CJXD, CULA, CULB):
AUDI A3 (8V1, 8VK): 1.8 TFSI, 2.0 TFSI 2012-present
AUDI A4 (B8.5): 2.0 TFSI 2012-2015
AUDI A5 (8T): 2.0 TFSI 2012-2016
AUDI Q5 (8R): 2.0 TFSI 2012-2017
ŠKODA SUPERB III (3V3): 2.0 TSI 2015-present
ŠKODA OCTAVIA III: 1.8 TSI, 2.0 TSI 2012-present
VOLKSWAGEN: Golf VII 1.8/2.0 TSI 2012-present, Passat B8 2.0 TSI 2014-present, Tiguan 2.0 TSI 2012-present
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 06K903133C / 06K903133B.
- Designed for accessory drive belt (serpentine belt) tensioning, maintaining proper belt tension for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including GATES 39272, INA 534010510, and CONTINENTAL V-3569 for easy interchangeability in the aftermarket.
- Precision spring-loaded mechanism automatically adjusts belt tension as the belt stretches over time.
- OE-compatible replacement for original part numbers 06K903133C, 06K903133B, and 06K903133A.
Installation Notes
- This tensioner is designed for the accessory drive belt system on VW Group models equipped with 2.0 TSI and 1.8 TSI engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use a long-handled wrench or serpentine belt tool to safely relieve spring tension – never cut or pry the belt off while under tension.
- When replacing the tensioner, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the tensioner mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolts to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces drive belt tensioners and wheel bearing assemblies to OE specifications. Contact us
