Tensioner Tension Pulley 1J0145276 For Audi Skoda
The DUHUI Bearing 1J0145276 drive belt idler pulley is an OE-spec replacement component for the accessory drive belt system on a wide range of Volkswagen Group models equipped with 1.4L, 1.6L, and 1.8T petrol engines. This idler pulley ensures proper serpentine belt routing and maintains correct belt tension, ensuring reliable alternator, air conditioning compressor, and power steering pump operation. Manufactured to match original equipment specifications including 1J0145276, 1J0145276B, and 6QD145276, this unit is a critical component for the VW Group EA827 and EA113 engine families.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 1J0145276 |
| Outer Diameter | 76.00 mm (2.992 inch) |
| Width | 26.00 mm (1.024 inch) |
| Product Type | Idler Pulley / Deflection Pulley |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 1J0145276, 1J0145276B, 6QD145276
Reference Numbers (Interchange):
INA: 532 0326 30
GATES: T38194
SKF: VKM31002
FEBI BILSTEIN: 39210
RUVILLE: 55734
Vehicle Fitment
This drive belt idler pulley is designed for VW Group models equipped with 1.4L, 1.6L, and 1.8T petrol engines:
AUDI A1 (8X1, 8XK): 1.4 TFSI 2010-2018
ŠKODA FABIA (6Y2, 6Y5): 1.4 2000-2007
ŠKODA OCTAVIA I: 1.4/1.6 1998-2004
VOLKSWAGEN: Golf IV 1.4/1.6 1997-2003, Bora 1.4/1.6 1998-2005, Passat 1.6 1996-2005, Polo 1.4 2001-2009
AUDI: A2 1.4 2000-2005, A3 1.4/1.6 1998-2003
SEAT: Ibiza 1.4 1999-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for VW Group applications with 1J0145276 / 1J0145276B.
- Designed for accessory drive belt (serpentine belt) guidance, maintaining proper belt routing for alternator, A/C compressor, and power steering pump operation.
- Cross-references with multiple leading brands including INA 532032630 and GATES T38194 for easy interchangeability in the aftermarket.
- Premium sealed bearing protects from contaminants and ensures long service life.
- OE-compatible replacement for original part numbers 1J0145276, 1J0145276B, and 6QD145276.
Installation Notes
- This pulley is designed for the accessory drive belt system on VW Group models equipped with 1.4L, 1.6L, and 1.8T petrol engines.
- Before removal, locate the OE belt routing diagram under the hood or make a sketch of the belt path.
- Use appropriate tools to safely relieve tension – never cut or pry the belt off while under tension.
- When replacing the pulley, it is recommended to inspect the serpentine belt for wear and replace it if necessary.
- Ensure the mounting surface is clean and free of debris before installing the new unit.
- Torque mounting bolt to manufacturer specifications – verify appropriate torque for your specific engine application.
- After installation, ensure the belt is properly seated in all pulley grooves and tracking correctly. Start engine briefly, shut off, and recheck belt alignment.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces idler pulleys, tensioner pulleys, and wheel bearing assemblies to OE specifications. Contact us
