VKBA782 Wheel Bearing Kits For ROVER
The DUHUI Bearing VKBA782 rear wheel bearing kit is an OE-replacement solution for the Rover 2000-3500 (P6) and 2000-3500 Hatchback (SD1) from the 1970s and 1980s. This comprehensive kit includes two bearings, a split pin, and grease, ensuring a complete rear hub rebuild for classic British saloon applications. Manufactured to match original equipment specifications including 328018 and GHK1005, this wheel bearing kit is also interchangeable with SKF VKBA782 and BORG & BECK BRT315.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DBK952 | |
| Part Number | VKBA782 | |
| Product Type | Wheel Bearing Kit | |
| Fitting Position | Rear Axle | |
| Kit Contents | 2 Bearings, 1 Split Pin, 1 Grease | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK952
OE Numbers:
328018, 893373M91, GHK1005, 27410, 881529, ABK016, BK110, BRT315, EUB0024
Reference Numbers (Interchange):
SKF: VKBA782
BORG & BECK: BRT315, BK110
FIRST LINE: GHK1005
BENDIX: ABK016
DELPHI: EUB0024
QUINTON HAZELL: 881529
Vehicle Fitment
ROVER 2000-3500 (P6): 2200 (TC) 1973-1976
ROVER 2000-3500 Hatchback (SD1): 2300 1977-1986
Additional compatible models (verify before ordering):
ROVER P6: 2000 (1963-1977), 3500 (1968-1977)
ROVER SD1: 2000, 2300, 2600, 3500 (1976-1986)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings, split pin, and grease for a full hub rebuild.
- Designed specifically for Rover P6 and SD1 classic saloon applications.
- Dual bearing configuration provides enhanced load distribution and stability.
- Kit format simplifies maintenance and reduces downtime.
- Included grease ensures proper lubrication during installation.
- Interchangeable with SKF VKBA782 and BORG & BECK BRT315.
Installation Notes
- This kit is designed for rear axle fitment on Rover P6 and SD1 models.
- Verify the kit contents match your original bearing before installation.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- Pack both bearings with the included grease before installation.
- The split pin must be correctly installed and secured to prevent loosening.
- Torque all fasteners to manufacturer specifications and check wheel bearing play after installation.
- Refer to the Rover service manual for proper bearing adjustment procedures.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
