Wheel Bearing Kits VKBA7626 For Hyundai
The DUHUI Bearing VKBA7626 wheel bearing kit is a front axle hub assembly designed for Hyundai i30 (GD) and Kia Ceed (JD) models. This comprehensive kit includes a pre-assembled hub unit with bearing and securing nut, providing all components needed for a complete front wheel bearing replacement. The kit matches OE specifications including 51750-A6000, with cross-references to SKF VKBA7626, SNR R184.78, and BLUE PRINT ADG08284.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK1143 |
| Part Number | VKBA7626 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Front Axle (Left / Right) |
| Kit Contents | 1 Hub Unit with Bearing, 1 Nut |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Wheel Bolt Holes | 5 |
| Centering Diameter | 82.00 mm (3.228 inch) |
| Bearing Type | Angular Contact Ball Bearing |
| Weight | 1.90 kg (4.19 lb) |
Note: Dimensional data is based on SKF, FAG, and SNR published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1143
OE Numbers:
51750-A6000
Reference Numbers (Interchange):
SKF: VKBA7626
SNR: R184.78
BLUE PRINT: ADG08284
FAG: 713626810
OPTIMAL: 921224
Vehicle Fitment
HYUNDAI i30 (GD): 1.6 GDI 2011-2016
HYUNDAI i30 II (GD): 1.4, 1.6 CRDi, 1.6 GDI, 1.6 T-GDI 2011-2026
KIA CEED (JD): 1.4, 1.6 GDI, 1.6 CRDi 2012-2017
KIA PRO CEED (JD): 1.4, 1.6 GDI, 1.6 CRDi 2013-2017
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes pre-assembled hub unit with bearing and securing nut – all components needed for a full hub replacement on Hyundai i30 and Kia Ceed models.
- Integrated design combines bearing, hub, and seal in a single pre-assembled unit – simplifies installation and reduces the risk of assembly errors.
- 5-bolt flange configuration with 139 mm diameter matches OE specifications for direct fitment.
- Angular contact ball bearing design with 82 mm centering diameter ensures stable load distribution and long service life.
- Cross-referenced with SKF VKBA7626, SNR R184.78, and BLUE PRINT ADG08284 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (139 mm) and centering diameter (82 mm).
- This kit is designed for front axle fitment on Hyundai i30 (GD) and Kia Ceed (JD) models – confirm placement before ordering.
- The hub assembly is pre-assembled – handle with care to avoid contamination or damage to the bearing surfaces.
- Inspect the steering knuckle and axle shaft for wear or damage before installing new components.
- Torque the securing nut and wheel bolts to Hyundai/Kia service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
