Wheel Bearing Kits VKBA7642 For Hyundai
The DUHUI Bearing VKBA7642 wheel bearing kit is a rear axle hub assembly designed for Hyundai Accent (RB), Hyundai Solaris, and Kia Rio (UB) models. This comprehensive kit includes a pre-assembled hub unit with bearing and integrated ABS sensor ring, providing all components needed for a complete rear wheel bearing replacement. The kit matches OE specifications including 52750-0U000, 52750-1R000, and 52750-4L000, with cross-references to SKF VKBA7642 and FAG 713626770.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK949 |
| Part Number | VKBA7642 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle |
| Kit Contents | 1 Hub Unit with Bearing |
| Flange Diameter | 132.10 mm (5.201 inch) |
| Wheel Bolt Holes | 4 |
| ABS Sensor Ring | Integrated |
| Weight | 2.62 kg (5.78 lb) |
Note: Dimensional data is based on SKF and FAG published specifications for the VKBA7642 series.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK949
OE Numbers:
52750-0U000, 52750-1R000, 52750-4L000, 52750-4L100, 52750-4L400
Reference Numbers (Interchange):
SKF: VKBA7642
FAG: 713626770
AUTOKIT: 03.1879
BLUE PRINT: ADG083119
OPTIMAL: 922361
Vehicle Fitment
HYUNDAI ACCENT IV (RB): 1.4, 1.6, 1.6 CRDi (2010-2019)
HYUNDAI SOLARIS (RB): 1.4, 1.6, 1.6 CRDi (2011-2017)
KIA RIO III (UB): 1.0, 1.1 CRDi, 1.2, 1.25, 1.4, 1.4 CRDi, 1.6 (2011-2019)
Engine Compatibility: 1.4 G4LC, 1.6 G4FC, 1.6 D4FB, 1.4 G4FA, 1.6 GDI G4FD
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes pre-assembled hub unit with bearing – all components needed for a full hub replacement on compatible Hyundai and Kia models.
- Designed specifically for Hyundai Accent IV (RB), Solaris, and Kia Rio III (UB) rear axle applications – verified fitment for 2010-2019 model years.
- Integrated ABS sensor ring ensures proper speed signal transmission for vehicles equipped with ABS.
- 4-bolt flange configuration with 132.1 mm flange diameter matches OE specifications for direct fitment.
- Cross-referenced with SKF VKBA7642, FAG 713626770, and BLUE PRINT ADG083119 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (132.1 mm) and 4-bolt configuration.
- This kit is designed for rear axle fitment on compatible Hyundai and Kia models – confirm placement before ordering.
- The hub assembly is pre-assembled with integrated bearing – handle with care to avoid contamination or damage to the bearing surfaces.
- For vehicles with ABS, ensure the integrated sensor ring is correctly positioned during installation.
- Torque the securing nut and wheel bolts to Hyundai/Kia service manual specifications for the RB/UB chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
