Wheel Bearing Kits VKBA7545 For Hyundai
The DUHUI Bearing VKBA7545 wheel bearing kit is a front axle replacement kit designed for the Hyundai i20 I (PB, PBT) and compatible Kia models. This comprehensive kit includes the bearing, a circlip, and a split pin, providing all components needed for a complete front wheel bearing replacement. It matches OE specifications including 51720-25001, 51720-2000AT, 51720-0U000, and 51718-07000, with cross-references to SKF VKBA7545, SNR R184.05, and other major aftermarket brands.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK933 |
| Part Number | VKBA7545 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front Axle |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Split Pin |
| Inner Diameter | 38.00 mm (1.496 inch) |
| Outer Diameter | 70.00 mm (2.756 inch) |
| Width | 37.00 mm (1.457 inch) |
Note: Dimensional data is based on SKF published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK933
OE Numbers:
51720-25001, 51720-29150, 51720-29400, 51720-02000AT, 51720-0U000, 51718-07000
Reference Numbers (Interchange):
SKF: VKBA7545
SNR: R184.05
MAPCO: 26436
RUVILLE: 8405
Vehicle Fitment
HYUNDAI i20 I (PB, PBT): 1.1 CRDi 2012-2015
HYUNDAI i20 I (PB, PBT): 1.2, 1.4, 1.6 2008-2015
HYUNDAI i20 I (PB, PBT): 1.4 CRDi, 1.6 CRDi 2008-2015
Compatible engine codes: D3FA, G4FA, G4FC, D4FA, D4FC, D4FB
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and split pin – all components needed for a full front hub rebuild on compatible Hyundai models.
- Designed specifically for Hyundai i20 I (PB, PBT) front axle applications – verified fitment for 2008-2015 model years .
- Precision-engineered bearing with 38 mm inner diameter and 70 mm outer diameter matches OE specifications for direct replacement .
- Cross-referenced with SKF VKBA7545, MAPCO 26436, and RUVILLE 8405 – confirmed interchange available .
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (38.00 mm) and outer diameter (70.00 mm) .
- This kit is designed for front axle fitment on Hyundai i20 I models – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Use the supplied split pin to secure the axle nut after torquing to manufacturer specifications.
- Torque all fasteners to Hyundai service manual specifications for the PB/PBT chassis .
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
