Wheel Bearing Kits VKBA7414 For Hyundai
The DUHUI Bearing VKBA7414 wheel bearing kit is a front and rear axle hub assembly designed for the Hyundai Grand Santa Fé (2013-2018) and compatible Hyundai Santa Fé, ix55, and Kia Sorento models with All-Wheel Drive (AWD). This comprehensive kit includes a pre-assembled hub unit with a 5-bolt flange, providing all components needed for a complete wheel bearing replacement. It matches OE specifications including 51750-2B010, 51750-2B000, 51750-3J000, and 51750-3J100, with cross-references to SKF VKBA7414 and FAG 713626640.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK897 |
| Part Number | VKBA7414 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Front Axle / Rear Axle (AWD) |
| Kit Contents | 1 Hub Unit with Bearing |
| Outer Diameter | 92.00 mm (3.622 inch) |
| Flange Diameter | 139.20 mm (5.480 inch) |
| Wheel Stud Quantity | 5 |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Weight | 3.75 kg (8.27 lb) |
Note: Dimensional data is based on SKF and other manufacturer specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK897
OE Numbers:
51750-2B010, 51750-2B000, 51750-3J000, 51750-3J100
Reference Numbers (Interchange):
SKF: VKBA7414
FAG: 713626640
MOOG: 513409
WJB: WA513409
BLUE PRINT: ADG08340
QUINTON HAZELL: QWB1674
NTY: KLP-KA-320
Vehicle Fitment
HYUNDAI GRAND SANTA FÉ (NC, DM): 2.2 CRDi AWD 2013-2018
HYUNDAI SANTA FÉ II (CM): 2006-2012
HYUNDAI SANTA FÉ III (DM, DMA): 2012-2018
HYUNDAI SANTA FÉ SPORT: 2013-2018 (AWD)
HYUNDAI ix55: 2006-2011
HYUNDAI VERACRUZ: 2007-2012
KIA SORENTO II (XM): 2009-2015 (AWD)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes a pre-assembled hub unit with integrated bearing – all components needed for a full hub replacement on compatible Hyundai and Kia models.
- Designed specifically for Hyundai Grand Santa Fé, Santa Fé (CM, DM), ix55, and Kia Sorento (XM) front and rear axle applications – verified fitment for 2006-2018 model years.
- 5-bolt flange configuration with 139.2 mm flange diameter and 114.3 mm bolt circle matches OE specifications for direct fitment.
- Constructed from high-grade GCr15 bearing steel (SAE52100) with induction-hardened raceways for superior load-bearing capacity and service life.
- Quad lip seal design provides enhanced contamination exclusion and lubrication retention.
- Cross-referenced with SKF VKBA7414, FAG 713626640, and MOOG 513409 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm outer diameter (92.00 mm), flange diameter (139.2 mm), and 5-bolt configuration.
- This kit is designed for AWD models – confirm drive configuration before ordering as it does not fit FWD variants.
- This is a Generation 1 hub unit – provides defined bearing clearance, lubrication for life, and a mounted sealing system.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Torque the securing nut and wheel bolts to Hyundai/Kia service manual specifications for the respective chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
