Wheel Bearing Kits VKBA6956 For Hyundai
The DUHUI Bearing VKBA6956 wheel bearing kit is a rear axle replacement kit designed for Hyundai Tucson (JM) and compatible Kia Sportage (JE/KM) models with All-Wheel Drive (AWD). This comprehensive kit includes the bearing, a circlip, and a split pin, providing all components needed for a complete rear wheel bearing replacement. It matches OE specifications including 51720-2J001, 52710-26500, and 50310-3E102, with cross-references to SKF VKBA6956, SNR R184.58, and FAG 713626590.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK853 |
| Part Number | VKBA6956 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Rear Axle |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Split Pin |
| Inner Diameter | 38.00 mm (1.496 inch) |
| Outer Diameter | 68.00 mm (2.677 inch) |
| Width | 43.00 mm (1.693 inch) |
Note: Dimensional data is based on SKF and FAG published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK853
OE Numbers:
51720-2J001, 52710-26500, 52710-26510, 52710-26530, 50310-3E102, 50310-3E201
Reference Numbers (Interchange):
SKF: VKBA6956
SNR: R184.58
FAG: 713626590
RUVILLE: 8953
BRT: WBK1117
A.B.S.: 201799
Vehicle Fitment
HYUNDAI TUCSON (JM): 2.0 CRDi AWD 2006-2010
HYUNDAI TUCSON (JM): 2.0 4WD, 2.7 V6 4WD 2004-2010
HYUNDAI TUCSON (JM): 2.0 D 4WD 2004-2010
KIA SPORTAGE (JE/KM): 2.0 CRDi AWD 2004-2010
KIA SPORTAGE (JE/KM): 2.0 4WD, 2.7 V6 4WD 2004-2010
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, and split pin – all components needed for a full rear hub rebuild on compatible Hyundai and Kia models.
- Designed specifically for Hyundai Tucson (JM) and Kia Sportage (JE/KM) rear axle AWD applications – verified fitment for 2004-2010 model years.
- Precision-engineered bearing with 38 mm inner diameter and 68 mm outer diameter matches OE specifications for direct replacement.
- Cross-referenced with SKF VKBA6956, SNR R184.58, and FAG 713626590 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (38.00 mm) and outer diameter (68.00 mm).
- This kit is designed for rear axle fitment on Hyundai Tucson and Kia Sportage AWD models – confirm placement and drive configuration before ordering.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Use the supplied split pin to secure the axle nut after torquing to manufacturer specifications.
- Torque all fasteners to Hyundai/Kia service manual specifications for the JM/JE chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
