Wheel Bearing Kits VKBA6949 For Hyundai
The DUHUI Bearing VKBA6949 wheel bearing kit is a rear axle hub assembly designed for the 2001-2006 Hyundai Elantra (XD) without ABS. This comprehensive kit includes a pre-assembled hub unit with a 4-bolt flange, providing all components needed for a complete rear wheel bearing replacement. It matches OE specification 52710-2D025 and is cross-referenced with SKF VKBA6949 and SNR R184.37.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK848 |
| Part Number | VKBA6949 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle (Left/Right) |
| Kit Contents | 1 Hub Unit with Bearing, 1 Nut |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Wheel Bolt Holes | 4 |
| ABS Sensor | Not Included (Non-ABS Model) |
| Material | GCr15 Bearing Steel (SAE52100) |
| Generation | Gen 2 Hub Unit |
| Quality Guarantee | 2 Years or 60,000 km |
Note: Dimensional data is based on SKF, SNR, and other manufacturer specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK848
OE Numbers:
52710-2D025, 52710-2D225
Reference Numbers (Interchange):
SKF: VKBA6949
SNR: R184.37
MOOG: 512194
PRORUN: K60857
Vehicle Fitment
HYUNDAI ELANTRA III (XD): 1.6, 1.8, 2.0 (2000-2006) – Without ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes a pre-assembled hub unit with bearing and securing nut – all components needed for a full hub replacement on non-ABS Hyundai Elantra models.
- Designed specifically for Hyundai Elantra (XD) rear axle applications without ABS – verified fitment for 2000-2006 model years.
- 4-bolt flange configuration with 139 mm flange diameter matches OE specifications for direct fitment.
- Constructed from high-grade GCr15 (SAE52100) bearing steel with 55# steel flange material – raceway hardness control of 60-65 HRC.
- This is a Generation 2 hub unit, combining the cost efficiency of first-generation bearings with integrated wheel flanges for simplified assembly.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (139 mm) and 4-bolt configuration.
- This kit is designed for non-ABS Hyundai Elantra models – do not use on vehicles equipped with ABS as this unit does not include an ABS sensor ring.
- The hub assembly is pre-assembled with integrated bearing – handle with care to avoid contamination or damage to the bearing surfaces.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Torque the securing nut and wheel bolts to Hyundai service manual specifications for the XD chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
