Wheel Bearing Kits VKBA6943 For Hyundai
The DUHUI Bearing VKBA6943 wheel bearing kit is a rear axle hub assembly designed for Hyundai Tucson (JM) and Kia Sportage (JE/KM) models with ABS. This comprehensive kit includes a pre-assembled hub unit with an integrated 48-tooth ABS sensor ring and securing nut, providing all components needed for a complete rear wheel bearing replacement. It matches OE specification 52710-2E100 and is cross-referenced with SKF VKBA6943 and SNR R184.49.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK845 |
| Part Number | VKBA6943 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle (Left/Right) |
| Kit Contents | 1 Hub Unit with Bearing, 1 Nut |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Wheel Bolt Holes | 5 |
| ABS Sensor Ring | Integrated (48 teeth) |
| Material | GCr15 Bearing Steel |
| Weight | 2.58 kg (5.69 lb) |
Note: Dimensional data is based on SKF and SNR published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK845
OE Numbers:
52710-2E100, 52710-2E000
Reference Numbers (Interchange):
SKF: VKBA6943
SNR: R184.49
FAG: 713626520
RUVILLE: 8946
SPIDAN: 27766
MOOG: HYWB11812
BLUE PRINT: ADG08362
OPTIMAL: 922317
Vehicle Fitment
HYUNDAI TUCSON (JM): 2.0 CRDi 2006-2010
HYUNDAI TUCSON (JM): 2.0, 2.0 LPG, 2.7 2004-2010
KIA SPORTAGE (JE/KM): 2.0 CRDi 2004-2010
Drive Configuration: FWD (2WD) models with ABS
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes a pre-assembled hub unit with bearing and securing nut – all components needed for a full hub replacement on compatible Hyundai and Kia models.
- Designed specifically for Hyundai Tucson (JM) and Kia Sportage (JE/KM) rear axle applications – verified fitment for 2004-2010 model years.
- Integrated 48-tooth ABS sensor ring ensures proper speed signal transmission for vehicles equipped with ABS.
- 5-bolt flange configuration with 139 mm flange diameter matches OE specifications for direct fitment.
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
- Cross-referenced with SKF VKBA6943, SNR R184.49, and FAG 713626520 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (139 mm) and 5-bolt configuration.
- This kit is designed for rear axle fitment on FWD Hyundai Tucson and Kia Sportage models with ABS – confirm placement and drive configuration before ordering.
- The hub assembly is pre-assembled with integrated bearing and ABS sensor ring – handle with care to avoid contamination or damage to the bearing surfaces.
- For vehicles with ABS, ensure the 48-tooth sensor ring is correctly positioned during installation.
- Torque the securing nut and wheel bolts to Hyundai/Kia service manual specifications for the JM/JE chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
