Wheel Bearing Kits VKBA6891 For Hyundai
The DUHUI Bearing VKBA6891 wheel bearing kit is a front axle replacement kit designed for Hyundai ix35 (LM) and compatible Kia Sportage (SL) models. This comprehensive kit includes the bearing, a circlip, and a split pin, providing all components needed for a complete front wheel bearing replacement. It matches OE specifications including 51720-3A101AT and 51720-1D000, with cross-references to SKF VKBA6891 and SNR R184.14.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK819 |
| Part Number | VKBA6891 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Front Axle (Left/Right) |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Split Pin |
| Inner Diameter | 40.00 mm (1.575 inch) |
| Outer Diameter | 74.00 mm (2.913 inch) |
| Width | 40.00 mm (1.575 inch) |
| Material | GCr15 Bearing Steel |
Note: Dimensional data based on SKF and SNR published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK819
OE Numbers:
51720-3A101AT, 51720-1D000, 51718-26000, 51718-26500, 51718-37000, 51718-38010, 51720-38110
Reference Numbers (Interchange):
SKF: VKBA6891
SNR: R184.14
FAG: 713626370
BLUE PRINT: ADG08374
MOOG: HY-WB-11833
A.B.S.: 201634
OPTIMAL: 922531
GSP: 9232018K
Vehicle Fitment
HYUNDAI ix35 (LM, EL, ELH): 2.0, 2.0 CRDi, 2.4 2009-2026
HYUNDAI TUCSON (ix35): 2009-2015
KIA SPORTAGE (SL): 2.0, 2.0 CRDi, 2.4 2010-2026
Engine Compatibility: 2.0 G4KD, 2.4 G4KE, 2.0 CRDi D4HA
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and split pin – all components needed for a full front hub rebuild on compatible Hyundai and Kia SUV models.
- Designed specifically for Hyundai ix35 (LM) and Kia Sportage (SL) front axle applications – verified fitment for 2009-2026 model years.
- Precision-engineered bearing with 40 mm inner diameter and 74 mm outer diameter matches OE specifications for direct replacement.
- Cross-referenced with SKF VKBA6891, SNR R184.14, and FAG 713626370 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (40.00 mm) and outer diameter (74.00 mm).
- This kit is designed for front axle fitment on compatible Hyundai and Kia models – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Use the supplied split pin to secure the axle nut after torquing to manufacturer specifications.
- Torque all fasteners to Hyundai/Kia service manual specifications for the LM/SL chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
