JHM720249/10 Wheel Bearing For VOLVO
The DUHUI Bearing JHM720249/10 tapered roller bearing set is an OE-replacement solution for Volvo heavy-duty trucks and a wide range of commercial vehicle applications . This comprehensive set includes both the JHM720249 cone (inner ring) and JHM720210 cup (outer ring), ensuring a complete bearing replacement for heavy-duty axle assemblies. Manufactured to match original equipment specifications including Volvo 183741 and Renault Trucks 959901205, this bearing set delivers reliable performance for compatible trucks and commercial vehicles.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB2617 | |
| Part Number | JHM720249/10 | |
| Product Type | Single Row Tapered Roller Bearing Set | |
| Bore Diameter (d) | 100.00 mm | 3.937 in |
| Outside Diameter (D) | 160.00 mm | 6.299 in |
| Cone Width (B) | 41.00 mm | 1.614 in |
| Cup Width (C) | 32.00 mm | 1.260 in |
| Total Width (T) | 41.00 mm | 1.614 in |
| Weight | 3.00 kg | |
| Dynamic Load Rating (Cr) | 220,000 N | |
| Static Load Rating (C0r) | 365,000 N | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2617
OE Numbers:
9442156, 8194959, 1228W595, 1228X596, 0023336046, 0023336123, 3661013900, 959901205, 324791025000, 183741
Reference Numbers (Interchange):
FAG: 201038, KJHM720249.JHM720210
SKF: VKHB2186, VKT8479
Timken: JHM720249/10, JHM720249/JHM720210, SET1169
ZF: 0735370822, 0735371915, 0750117339
Vehicle Fitment
VOLVO: Various heavy-duty truck models
Additional compatible applications (verify before ordering):
RENAULT TRUCKS: Various heavy-duty models
IVECO: Various heavy-duty models
GENERAL MOTORS: Heavy-duty commercial vehicles
MERITOR: Axle assemblies
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete tapered roller bearing set includes cone (JHM720249) and cup (JHM720210) for a full bearing replacement.
- Single-row tapered design provides excellent radial and thrust load capacity for heavy-duty axle applications.
- Case-carburized steel construction provides a hard wear-resistant surface with a tough, ductile core for shock load resistance.
- Separable cone and cup components simplify mounting and maintenance.
- Interchangeable with major brands including Timken, SKF, and FAG.
Installation Notes
- Confirm bore diameter is 100.00 mm (3.937 in), outside diameter is 160.00 mm (6.299 in), and total width is 41.00 mm (1.614 in) before installation.
- This is an open bearing – pack with high-quality grease before installation.
- Single-row tapered bearings must be mounted in opposing pairs (face-to-face or back-to-back) to accommodate axial loads in both directions.
- Inspect the shaft and housing surfaces for damage or wear before installing new components.
- Torque all fasteners to manufacturer specifications and check bearing preload after installation.
- Refer to the vehicle service manual for proper bearing adjustment procedures and torque specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive and industrial bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
