14137A/276 Wheel Bearing For CADILLAC
The DUHUI Bearing 14137A/276 tapered roller bearing is an inch-series single-row cone and cup assembly designed for differential and axle applications. This bearing meets OE specifications for Cadillac and is interchangeable with Timken 14137A-14276 and NTN 4T-14137A/276. The assembly supports combined radial and axial loads in one direction for drivetrain reliability.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2614 |
| Part Number | 14137A/276 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 34.93 mm (1.375 inch) |
| Outer Diameter (D) | 69.01 mm (2.717 inch) |
| Total Width (T) | 19.85 mm (0.781 inch) |
| Cone Width (B) | 19.58 mm (0.771 inch) |
| Cup Width (C) | 15.88 mm (0.625 inch) |
| Cone Radius | 1.58 mm (0.062 inch) |
| Dynamic Load Rating (Cr) | 58.9 kN (13,240 lbf) |
| Static Load Rating (Cor) | 61.0 kN (13,710 lbf) |
| Weight | 0.34 kg (0.75 lb) |
Note: Dimensional data is based on Timken and Fersa published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2614
OE Numbers:
14137A/276
Reference Numbers (Interchange):
Timken: 14137A-14276
NTN: 4T-14137A/276
Fersa: 14137A/14276
Ford: 9N742
British Leyland: 217490
Vehicle Fitment
CADILLAC: Various models (verify OE number and dimensions before ordering)
Additional applications (industrial and agricultural):
CASE IH: 55, 75, 77, 140, 177, 1640, 1644, 1660, 1666, 1680, 2144, 2166, 2188, 2344, 2366, 3288, 7110, 7120, 7130, 7140, 7150
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads – suitable for differential pinion and axle applications.
- Inch-series configuration with 34.93 mm bore and 69.01 mm outer diameter matches Timken 14137A-14276 for direct replacement.
- Separable cone and cup construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – rated for 58.9 kN dynamic load and 61.0 kN static load.
- Interchangeable with major brands including Timken, NTN, and Fersa equivalents – confirmed cross-reference available.
- Standard precision class – suitable for automotive drivetrain and light industrial applications.
Installation Notes
- Confirm bore diameter (34.93 mm) and outer diameter (69.01 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for differential and axle operation.
- Lubricate with high-quality gear oil or grease – refer to your vehicle manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
