86649/10 Wheel Bearing For Volvo
The DUHUI Bearing 86649/10 wheel bearing is an inch-series single-row tapered roller bearing assembly consisting of an M86649 cone (inner ring) and an M86610 cup (outer ring). With a 30.162 mm bore, 64.292 mm outer diameter, and 21.433 mm total width, this bearing supports combined radial and axial loads in automotive drivetrain and wheel hub applications. It matches Volvo OE specification 86649/10 and is cross-referenced with Timken M86649/M86610 and GERMO 08143118.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2613 |
| Part Number | 86649/10 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 30.16 mm (1.187 inch) |
| Outer Diameter (D) | 64.29 mm (2.531 inch) |
| Total Width (T) | 21.43 mm (0.844 inch) |
| Cone Number | M86649 |
| Cup Number | M86610 |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.33 kg (0.73 lb) |
Note: Dimensional data is based on Timken published specifications for the M86649/M86610 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2613
OE Numbers:
86649/10
Reference Numbers (Interchange):
Timken: M86649/M86610, 86649/10
GERMO: 08143118
Vehicle Fitment
VOLVO: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive drivetrain and wheel hub applications.
- Inch-series configuration with 30.162 mm bore and 64.292 mm outer diameter matches Timken M86649/M86610 and Volvo OE 86649/10 for direct replacement.
- Separable cup and cone construction (M86649 cone / M86610 cup) simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Cross-referenced with GERMO 08143118 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (30.162 mm) and outer diameter (64.292 mm) match your existing bearing and housing before installation.
- This bearing is a combination of cone (M86649) and cup (M86610) – the cone includes the inner ring with cage and roller set, while the cup is the outer ring.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Single-row tapered roller bearings must be mounted in mirror-image arrangement with a second tapered roller bearing to accommodate axial loads in both directions.
- Lubricate with high-quality gear oil or grease – refer to the Volvo service manual for viscosity grade and lubrication method.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
