VKBA3297 Wheel Bearing Kits For DAIHATSU
The DUHUI Bearing VKBA3297 is a complete rear wheel bearing kit designed for Daihatsu Applause models from 1997 to 2000. This comprehensive kit includes one bearing, one circlip, and one split pin, matching OE specifications including 90043-63368 and 713616110. It is directly interchangeable with SKF VKBA3297, SNR R179.07, and FAG 713616110.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK214 |
| Part Number | VKBA3297 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 64.00 mm (2.520 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Daihatsu Applause applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK214
OE Numbers: 90043-63368, 713616110, 90043-63360, 90043-63361, 90043-63362
Reference Numbers (Interchange):
SKF: VKBA3297
SNR: R179.07
FAG: 713616110
BRT: BRT530
KOYO: DAC3564A-1CS31
NTN: 4T-CR1-0397LLCS
TOYOTA: 90043-63368, 90043-63360
Vehicle Fitment
DAIHATSU: APPLAUSE II Hatchback (A101) 1.6 16V – 1997-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, and split pin – all components for a full bearing replacement
- Specifically engineered for Daihatsu Applause II rear axle applications
- Direct interchange with SKF VKBA3297, SNR R179.07, and FAG 713616110
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and split pin x1
- Confirm rear axle fitment for your specific Daihatsu Applause model (1997-2000)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Daihatsu service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
