32220 Wheel Bearing For IVECO
The DUHUI Bearing 32220 wheel bearing is a metric-series single-row tapered roller bearing designed for heavy-duty Iveco commercial vehicle rear axle and wheel hub applications. With a 100 mm bore, 180 mm outer diameter, and 50 mm total width, this bearing supports combined radial and axial loads in demanding drivetrain positions. It matches Iveco OE specifications including 1905351 and 7178989, and is cross-referenced with SKF 32220J2, Timken 32220, and Koyo 32220JR.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2588 |
| Part Number | 32220 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 100.00 mm (3.937 inch) |
| Outer Diameter (D) | 180.00 mm (7.087 inch) |
| Total Width (T) | 50.00 mm (1.969 inch) |
| Dynamic Load Rating (Cr) | 305.0 kN (68,570 lbf) |
| Static Load Rating (C0r) | 440.0 kN (98,920 lbf) |
| Grease Limit Speed | 2,100 rpm |
| Oil Limit Speed | 2,800 rpm |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 5.52 kg (12.17 lb) |
Note: Dimensional and performance data is based on SKF and Timken published specifications for the 32220 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2588
OE Numbers:
1905351, 7178989, 99041058
Reference Numbers (Interchange):
SKF: 32220J2, VKHB2297
Timken: 32220, SET1069
FAG: 32220A
NTN: 32220U, 4T32220
Koyo: 32220JR
NSK-RHP: HR32220J
SNR: HDB089
Vehicle Fitment
IVECO EUROSTAR LD: 190 E 38 P, 400 E 38 TX/P, LD 440 E 38 TX/P (1993-2002)
IVECO EUROSTAR LD: 440 E 38 T, 440 E 38 TZ (1993-2002)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty commercial vehicle rear axle, wheel hub, and transmission applications.
- Metric-series configuration with 100 mm bore and 180 mm outer diameter matches SKF 32220J2, Timken 32220, and Koyo 32220JR equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – rated for 305 kN dynamic load and 440 kN static load for demanding commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
- Cross-referenced with Iveco OE 1905351 and Meritor 99041058 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (100.00 mm) and outer diameter (180.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to Iveco manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Iveco service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
