VKBA3791 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3791 is a complete rear wheel bearing kit designed for Hyundai S-Coupe models from 1990 to 1996. This kit includes two bearings and one split pin, matching OE specifications including 5271324000 and 5271328000. It is directly interchangeable with SKF VKBA3791, FAG 713619520, and BRT BRT3791.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK525 |
| Part Number | VKBA3791 |
| Inside Diameter | 32.00 mm (1.260 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x2, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Hyundai S-Coupe applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK525
OE Numbers: 5271324000, 5271328000, 52713TEMP1, 922882
Reference Numbers (Interchange):
SKF: VKBA3791
FAG: 713619520
BRT: BRT3791
RUVILLE: 8404
SPIDAN: 27214
Vehicle Fitment
HYUNDAI: S-COUPE Roadster (SLC) – 1990-1996
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai S-Coupe rear axle applications
- Direct interchange with SKF VKBA3791 and FAG 713619520
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2 and split pin x1
- Confirm rear axle fitment for your specific Hyundai S-Coupe model (1990-1996)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
