VKBA3266 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3266 is a complete rear wheel bearing kit designed for Hyundai Accent models from 1994 to 2000. This kit includes one hub assembly and one retaining nut, matching OE specifications including 5271022400 and 5271022000. It is directly interchangeable with SKF VKBA3266, SNR R184.02, and FAG 713619050.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK198 |
| Part Number | VKBA3266 |
| Flange Diameter | 131.00 mm (5.157 inch) |
| Wheel Stud Quantity | 4 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Hyundai Accent applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK198
OE Numbers: 5271022400, 5271022000, 5271022200, 922781, QWB1081
Reference Numbers (Interchange):
SKF: VKBA3266
SNR: R184.02
FAG: 713619050
BRT: BRT3266
RUVILLE: 8402
QUINTON HAZELL: QWB1081
Vehicle Fitment
HYUNDAI: ACCENT Sedan (X-3) – 1994-2000, ACCENT Hatchback (X-3) – 1994-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor and retaining nut – all components for a full hub replacement
- Specifically engineered for Hyundai Accent rear axle applications
- Direct interchange with SKF VKBA3266, SNR R184.02, and FAG 713619050
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1 and nut x1
- Confirm rear axle fitment for your specific Hyundai Accent model (1994-2000)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the retaining nut and four flange bolts to Hyundai service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
