Wheel Bearing Kits VKBA3259 For HYUNDAI
The DUHUI Bearing VKBA3259 is a complete rear wheel bearing kit designed for Hyundai Sonata III models from 1993 to 1998. This kit includes two bearings and one split pin, matching OE specifications including 5272036200 and 40215A0100. It is directly interchangeable with SKF VKBA3259, SNR R184.72, and BRT BRT3259.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK194 |
| Part Number | VKBA3259 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 72.00 mm (2.835 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x2, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Hyundai Sonata applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK194
OE Numbers: 5272036200, 40215A0100, 922395
Reference Numbers (Interchange):
SKF: VKBA3259
SNR: R184.72
BRT: BRT3259
RUVILLE: 8399
SPIDAN: 27659
Vehicle Fitment
HYUNDAI: SONATA III (Y-3) 3.0 i V6 – 1993-1998
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai Sonata III rear axle applications
- Direct interchange with SKF VKBA3259 and SNR R184.72
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2 and split pin x1
- Confirm rear axle fitment for your specific Hyundai Sonata III model (1993-1998)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
