VKBA1369 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA1369 is a complete front wheel bearing kit designed for Hyundai H-1 / Starex models from 2004 to 2007. This comprehensive kit includes two bearings, one oil seal, and one split pin, matching OE specifications including 5170144030 and 5170344030. It is directly interchangeable with SKF VKBA1369, SNR R140.34, and FAG 713619300.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK049 |
| Part Number | VKBA1369 |
| Inside Diameter | 41.00 mm (1.614 inch) |
| Outside Diameter | 74.00 mm (2.913 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front Axle |
| Kit Contents | Bearing x2, Oil Seal x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a front wheel bearing kit designed for Hyundai H-1 / Starex applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK049
OE Numbers: 5170144030, 5170344030, 8942426830, 8942429130, 4421350201, 4421350202, 3666951
Reference Numbers (Interchange):
SKF: VKBA1369
SNR: R140.34
FAG: 713619300
BRT: BRT1369
RUVILLE: 6093
SPIDAN: 26337
NIPPARTS: J4713005
Vehicle Fitment
HYUNDAI: H-1 / STAREX Bus (A1) 2.5 TCi – 2004-2007
KIA: BESTA 2.5 – 2004-2007
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes two bearings, oil seal, and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai H-1 / Starex and Kia Besta front axle applications
- Direct interchange with SKF VKBA1369, SNR R140.34, and FAG 713619300
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- Oil seal included to prevent contaminant ingress and retain lubricant
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2, oil seal x1, and split pin x1
- Confirm front axle fitment for your specific Hyundai H-1 / Starex model (2004-2007)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Install the oil seal with the correct orientation to prevent leaks
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
