VKBA859 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA859 is a complete rear wheel bearing kit designed for Honda Civic I models from 1980 to 1983. This comprehensive kit includes two bearings and two split pins, matching OE specifications including 912515 and ABK195. It is directly interchangeable with SKF VKBA859, SNR R174.09, and FAG 713617220.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK965 |
| Part Number | VKBA859 |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 55.00 mm (2.165 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x2, Split Pin x2 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Civic applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK965
OE Numbers: 912515, ABK195, BRT598, EUB1042, GHK1167
Reference Numbers (Interchange):
SKF: VKBA859
SNR: R174.09
FAG: 713617220
BRT: BRT598
RUVILLE: 7409
SPIDAN: 26650
AUTOMOTIVE BEARINGS: ABK195
Vehicle Fitment
HONDA: CIVIC I Saloon (SF) 1300 L – 1980-1983
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings and two split pins – all components for a full bearing replacement
- Specifically engineered for Honda Civic I rear axle applications
- Direct interchange with SKF VKBA859, SNR R174.09, and FAG 713617220
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2 and split pin x2
- Confirm rear axle fitment for your specific Honda Civic I model (1980-1983)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Use the new split pins supplied – do not reuse old retaining hardware
- Torque the retaining nut to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
