VKBA7540 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA7540 is a complete rear wheel bearing kit designed for Honda Accord models from 2008 to 2009. This kit includes one hub assembly with an integrated ABS sensor, matching OE specifications including 42200TA0A51 and 42200TL0G51. It is directly interchangeable with SKF VKBA7540, SNR R174.98, and FAG 713627020.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK932 |
| Part Number | VKBA7540 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Wheel Stud Quantity | 5 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Accord applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK932
OE Numbers: 42200TA0A51, 42200TCOT51, 42200TL0G51
Reference Numbers (Interchange):
SKF: VKBA7540
SNR: R174.98
FAG: 713627020
BRT: BRT7540
MOOG: 513270
Vehicle Fitment
HONDA: ACCORD EX L4 2.4L – 2008-2009
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor – plug-and-play compatibility
- Specifically engineered for Honda Accord rear axle applications
- Direct interchange with SKF VKBA7540, SNR R174.98, and FAG 713627020
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1
- Confirm rear axle fitment for your specific Honda Accord model (2008-2009)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the four flange bolts to Honda service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
