VKBA7491 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA7491 is a complete wheel bearing kit designed for Honda Accord wagon models from 2008 onward. This kit includes one bearing, one circlip, and one retaining nut, matching OE specifications including 44300TA0A51 and 44300TA0A61. It is directly interchangeable with SKF VKBA7491, SNR R174.97, and FAG 713627030.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK920 |
| Part Number | VKBA7491 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front and Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a wheel bearing kit designed for Honda Accord applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK920
OE Numbers: 44300TA0A51, 44300TA0A61
Reference Numbers (Interchange):
SKF: VKBA7491
SNR: R174.97
FAG: 713627030
BRT: BRT7491
MOOG: 513286
Vehicle Fitment
HONDA: ACCORD wagon – 2008 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes bearing, circlip, and retaining nut – all components for a full bearing replacement
- Specifically engineered for Honda Accord wagon applications
- Direct interchange with SKF VKBA7491, SNR R174.97, and FAG 713627030
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and nut x1
- Confirm axle fitment for your specific Honda Accord wagon model (2008 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Honda service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
