VKBA7447 Wheel Bearing Kits For HONDA
The DUHUI Bearing VKBA7447 is a complete rear wheel bearing kit designed for Honda Insight hatchback models from 2009 onward. This kit includes one hub assembly and one retaining nut, matching OE specifications including 42200TF0N51. It is directly interchangeable with SKF VKBA7447, SNR R174.92, and FAG 713617940.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK909 |
| Part Number | VKBA7447 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Wheel Stud Quantity | 5 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Honda Insight applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK909
OE Numbers: 42200TF0N51
Reference Numbers (Interchange):
SKF: VKBA7447
SNR: R174.92
FAG: 713617940
BRT: BRT7447
MOOG: 513286
Vehicle Fitment
HONDA: INSIGHT Hatchback (ZE_) – 2009 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor and retaining nut – all components for a full hub replacement
- Specifically engineered for Honda Insight rear axle applications
- Direct interchange with SKF VKBA7447, SNR R174.92, and FAG 713617940
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1 and nut x1
- Confirm rear axle fitment for your specific Honda Insight model (2009 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the retaining nut and four flange bolts to Honda service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
