VKBA654 Wheel Bearing Kits For DACIA
The DUHUI Bearing VKBA654 is a complete rear wheel bearing kit designed for Dacia 1210 models from 1983 to 1994. This comprehensive kit includes two bearings, one oil seal, and one split pin, matching OE specifications including 51852028 and 4759144. It is directly interchangeable with SKF VKBA654, SNR R155.22, and BRT BRT654.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK646 |
| Part Number | VKBA654 |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x2, Oil Seal x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Dacia 1210 applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK646
OE Numbers: 51852028, 4759144, 4161329
Reference Numbers (Interchange):
SKF: VKBA654
SNR: R155.22
BRT: BRT654
RUVILLE: 51852028
Vehicle Fitment
DACIA: 1210 1.2 – 1983-1994
RENAULT: 12 – 1983-1994
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes two bearings, oil seal, and split pin – all components for a full bearing replacement
- Specifically engineered for Dacia 1210 rear axle applications
- Direct interchange with SKF VKBA654 and SNR R155.22
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- Oil seal included to prevent contaminant ingress and retain lubricant
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2, oil seal x1, and split pin x1
- Confirm rear axle fitment for your specific Dacia 1210 model (1983-1994)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Install the oil seal with the correct orientation to prevent leaks
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Dacia service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
